Hardware

All posts tagged 'Hardware'.

  • 9posts
Builds

3D-Printed ESP32 Enclosure Design Rules That Fit

How to design a 3D-printed ESP32 enclosure that fits: clearances, board holders, M3 screws, vents, antenna and PLA vs PETG, with real OpenGizmo numbers.

Read more
Guides

ESP32-CAM GPIO Pins: Which Are Really Free

Which ESP32-CAM GPIO pins you can use: GPIO13 and GPIO12 in 1-bit SD mode, GPIO4 flash LED, GPIO16 PSRAM, strapping pins, from the AI Thinker schematic.

Read more
Guides

ESP32 Deep Sleep Current: Chip vs Dev Board

ESP32 deep sleep current is 5 to 10 µA for the chip, but 14 µA to several mA on a dev board. Datasheet figures, wake-up sources and battery life math.

Read more
Guides

ESP32 Strapping Pins by Chip: S3, C3, C6, Classic

Every ESP32 strapping pin on the classic ESP32, S3, C3 and C6 with its default level and what it selects, straight from the datasheets, plus safe-use rules.

Read more
Comparisons

MAX7219 vs HUB75 LED Matrix for ESP32: Which to Pick

MAX7219 vs HUB75 LED matrix on an ESP32: pins, power, colors, libraries and cost compared, plus why the Gizmo Ticker uses a MAX7219 matrix.

Read more
Comparisons

Which ESP32 Should You Buy? S3, C3, C6, P4 Compared

Buy an ESP32-S3 board for most projects. See when the C3, C6, P4 or the original ESP32 fits better, with datasheet numbers as of November 2026.

Read more
Guides

XIAO ESP32-S3 Pinout: Which Pins Are Safe to Use

XIAO ESP32-S3 pinout: D0 to D10 mapped to GPIO, the default I2C, SPI and UART pads, the one strapping pad to avoid, and two real firmware pin maps.

Read more
Comparisons

XIAO ESP32-S3 vs C3 vs C6: Which XIAO to Buy

XIAO ESP32-S3 vs ESP32-C3 vs C6 on memory, radios, antenna, battery charging and deep sleep, from Seeed's wiki, plus why OpenGizmo runs on the S3.

Read more
Comparisons

ESP32 vs ESP8266: Specs, Differences and Which to Pick

ESP32 vs ESP8266 compared on cores, SRAM, GPIO, ADC, Bluetooth and sleep current from the datasheets, plus when the ESP8266 still makes sense.

Read more